Smooth and Uninterrupted
With a trapezoidal tempered glass and three built-in 120mm ARGB fans to allow high air flow go through the aggressive angled slots.
One Press and Sync All
Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the TALOS E2 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.
Out of the Ordinary
The TALOS E2 Elite comes with a single side magnetic closing tempered glass swinging door. Not only showcasing all the components, also makes modding easier and more convenient.
The accommodation inside TALOS E2 Elite is able to support up to six 120mm fans. Mounting points for 280mm, 240mm radiators at the top and additional 360mm at front, 140mm or 120 mm radiator in the rear.
The TALOS E2 Elite’s internal volume is 15% larger than it’s predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available.
A clean designed side glass panel without the thumb screws getting in the way visually. A unique designed mechanism which allows the side glass panel to slide and clip right into the case. Therefor you are able to function the 4mm tinted tempered glass with ease, which displays your internal rig components.
TALOS E2 ELITE OVERVIEW
“Elite and Effective”
The TALOS E2 Elite mid-tower again features the trapezoidal tempered glass front panel and eye-catching trio of 120mm ARGB lighting fans. With the new side swinging magnetically closing tempered glass side panel to top any extravagant ARGB battle station.
|Product Name||TALOS E2 Elite|
|Case Type||MID Tower|
|Motherboard Support||mini-ITX, microATX, ATX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support||Top:280 mm, 240mm
Front:360 mm, 280mm
Rear:140 mm, 120mm
|Fan Support||Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 2 x 140mm，2 x200mm
Rear: 1 x 120mm , 1 x 140mm
|Pre-installed Fans||Front: 3 x 120mm ARGB Fans
Rear: 1 x 120mm Fan
|Drive Bays||“2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage)
3 x 2.5”
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, LED Control x1|
|Clearance||CPU cooler height limitation: 190mm
VGA length limitation: 340mm
PSU length limitation: 180mm
|Dimension(LxWxH)||392 x230 x 467 mm|